UAD Chandler Limited Curve Bender
All four EQ bands on one page, frequency and gain for each: bass, presence 2, presence 1 and treble. Every knob is stepped. Mapped to the left channel, so the plugin needs to be linked for the right to follow.
Tested with the device Somebody has run this into the gear it was made for.
Does this work with your Universal Audio Chandler Limited Curve Bender EQ?
Open ROTO-SETUP with the Roto in PLUGIN mode, then File > Import.
The layout
Page 1
L Bass Freq
- Out
- 35 Hz
- 50 Hz
- 70 Hz
- 91 Hz
- 150 Hz
- 200 Hz
- 300 Hz
L Bass Gain21 steps
LPresnc2Freq
- Out
- 0.3 kHz
- 0.4 kHz
- 0.5 kHz
- 0.8 kHz
- 1.2 kHz
- 1.8 kHz
- 2.8 kHz
- 3.6 kHz
LPresnc2Gain21 steps
LPresnc1Freq
- Out
- 0.8 kHz
- 1.2 kHz
- 1.8 kHz
- 2.8 kHz
- 3.6 kHz
- 4.2 kHz
- 6.5 kHz
- 8.1 kHz
LPresnc1Gain21 steps
LTrebleFreq
- Out
- 3.6 kHz
- 4.2 kHz
- 6.5 kHz
- 8.1 kHz
- 10 kHz
- 12 kHz
- 16 kHz
- 20 kHz
LTrebleGain21 steps
| Control | Name | Feel |
|---|---|---|
| Knob 1 | L Bass Freq | 8 detents: Out, 35 Hz, 50 Hz, 70 Hz, 91 Hz, 150 Hz, 200 Hz, 300 Hz |
| Knob 2 | L Bass Gain | 21 detents |
| Knob 3 | LPresnc2Freq | 9 detents: Out, 0.3 kHz, 0.4 kHz, 0.5 kHz, 0.8 kHz, 1.2 kHz, 1.8 kHz, 2.8 kHz, 3.6 kHz |
| Knob 4 | LPresnc2Gain | 21 detents |
| Knob 5 | LPresnc1Freq | 9 detents: Out, 0.8 kHz, 1.2 kHz, 1.8 kHz, 2.8 kHz, 3.6 kHz, 4.2 kHz, 6.5 kHz, 8.1 kHz |
| Knob 6 | LPresnc1Gain | 21 detents |
| Knob 7 | LTrebleFreq | 9 detents: Out, 3.6 kHz, 4.2 kHz, 6.5 kHz, 8.1 kHz, 10 kHz, 12 kHz, 16 kHz, 20 kHz |
| Knob 8 | LTrebleGain | 21 detents |
Details
- Made for
- Universal Audio Chandler Limited Curve Bender EQ
- Format
- AU
- DAW
- Logic Pro
- Works with
- Roto-Control
- Panel used
- 8 knobs
- Added
- 2026-09-16