The Melbourne Exchange

SSL Native Bus Compressor 2

The Bus Compressor 2 on one page, learned in Bitwig Studio from the VST3.

Knobs 1 and 2 are Threshold and Makeup Gain. Attack, Release and Ratio on knobs 3 to 5 click through every setting the plugin has, labelled on the Roto's screen: attack 0.1, 0.3, 1, 3, 10, 20 and 30 ms; release 0.1, 0.3, 0.4, 0.6, 0.8 and 1.2 s and Auto; ratio 1.5, 2, 3, 4, 10 and 20:1 and X. Knob 6 is the sidechain high-pass filter, knob 7 Dry/Wet Mix, and knob 8 Oversampling (off, 2x, 4x).

Buttons: external sidechain on 6 and Mix Lock on 8.

Made in Bitwig Studio with the VST3.

Tested with the device Somebody has run this into the gear it was made for.

Download

Open ROTO-SETUP with the Roto in PLUGIN mode, then File > Import.

The layout

Page 1

Threshold
Makeup Gain
Attack
  • Attack 0.1mS
  • Attack 0.3mS
  • Attack 1mS
  • Attack 3mS
  • Attack 10mS
  • Attack 20mS
  • Attack 30mS
Release
  • Release 0.1S
  • Release 0.3S
  • Release 0.4S
  • Release 0.6S
  • Release 0.8S
  • Release 1.2S
  • Release AUTO
Ratio
  • Ratio 1.5:1
  • Ratio 2:1
  • Ratio 3:1
  • Ratio 4:1
  • Ratio 10:1
  • Ratio 20:1
  • Ratio X
Sidechain HP
Dry/Wet Mix
Oversampling
  • Oversmp off
  • Oversmp 2x
  • Oversmp 4x
ControlNameFeel
Knob 1ThresholdSmooth
Knob 2Makeup GainSmooth
Knob 3Attack7 detents: Attack 0.1mS, Attack 0.3mS, Attack 1mS, Attack 3mS, Attack 10mS, Attack 20mS, Attack 30mS
Knob 4Release7 detents: Release 0.1S, Release 0.3S, Release 0.4S, Release 0.6S, Release 0.8S, Release 1.2S, Release AUTO
Knob 5Ratio7 detents: Ratio 1.5:1, Ratio 2:1, Ratio 3:1, Ratio 4:1, Ratio 10:1, Ratio 20:1, Ratio X
Knob 6Sidechain HPSmooth
Knob 7Dry/Wet MixSmooth
Knob 8Oversampling3 detents: Oversmp off, Oversmp 2x, Oversmp 4x
Button 6External S/CLatching
Button 8Mix LockLatching

Details

Made for
Solid State Logic Native Bus Compressor 2
Format
VST3
DAW
Bitwig
Works with
Roto-Control
Panel used
8 knobs, 2 buttons
Firmware tested
3.3.0
Added
2026-10-26