reFX Vanguard 2
Vanguard 2 across all eight pages, 64 knobs.
Page 1: Osc 1 and Osc 2 volume, semitone, detune and PWM. Page 2: the same for Osc 3, then Fat, vibrato depth and speed, and Main Volume.
Pages 3 to 5 are the three envelopes: attack, decay, sustain and release on knobs 1 to 4, and on 5 to 8 how much each one moves its targets (volume, PWM, cutoff and detune for Env 1; resonance, PWM, cutoff and pitch for Envs 2 and 3), with a centre detent at zero.
Page 6 is the two LFOs: rate and amounts to detune, PWM and cutoff, LFO 1 on knobs 1 to 4 and LFO 2 on 5 to 8. Buttons 1 and 5 switch each LFO's retrigger.
Page 7: filter cutoff, resonance, key and velocity tracking, then amp drive, volume, pan and spread. Page 8: trance gate mix, contour and width, then delay mix, feedback, modulation, low cut and high cut.
Made in Ableton Live with the VST3.
Tested with the device Somebody has run this into the gear it was made for.
Does this work with your reFX Vanguard 2?
Open ROTO-SETUP with the Roto in PLUGIN mode, then File > Import.
The layout
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
All 66 controls
| Page | Control | Name | Feel |
|---|---|---|---|
| 1 | Knob 1 | OSC1 vol | Smooth |
| 1 | Knob 2 | OSC1 semi | Smooth |
| 1 | Knob 3 | OSC1 detune | Smooth |
| 1 | Knob 4 | OSC1 pwm | Smooth |
| 1 | Knob 5 | OSC2 vol | Smooth |
| 1 | Knob 6 | OSC2 semi | Smooth |
| 1 | Knob 7 | OSC2 detune | Smooth |
| 1 | Knob 8 | OSC2 pwm | Smooth |
| 2 | Knob 1 | OSC3 vol | Smooth |
| 2 | Knob 2 | OSC3 semi | Smooth |
| 2 | Knob 3 | OSC3 detune | Smooth |
| 2 | Knob 4 | OSC3 pwm | Smooth |
| 2 | Knob 5 | OSC fat | Smooth |
| 2 | Knob 6 | Vib depth | Smooth |
| 2 | Knob 7 | Vib speed | Smooth |
| 2 | Knob 8 | Main Vol | Smooth |
| 3 | Knob 1 | ENV1 Attack | Smooth |
| 3 | Knob 2 | ENV1 Decay | Smooth |
| 3 | Knob 3 | ENV1 Sustain | Smooth |
| 3 | Knob 4 | ENV1 Release | Smooth |
| 3 | Knob 5 | ENV1 >Vol | Center indent |
| 3 | Knob 6 | ENV1 >PWM | Center indent |
| 3 | Knob 7 | ENV1 >Cutoff | Center indent |
| 3 | Knob 8 | ENV1 >Detune | Center indent |
| 4 | Knob 1 | ENV2 Attack | Smooth |
| 4 | Knob 2 | ENV2 Decay | Smooth |
| 4 | Knob 3 | ENV2 Sustain | Smooth |
| 4 | Knob 4 | ENV2 Release | Smooth |
| 4 | Knob 5 | ENV2 >Resona | Center indent |
| 4 | Knob 6 | ENV2 >PWM | Center indent |
| 4 | Knob 7 | ENV2 >Cutoff | Center indent |
| 4 | Knob 8 | ENV2 >Pitch | Center indent |
| 5 | Knob 1 | ENV3 Attack | Smooth |
| 5 | Knob 2 | ENV3 Decay | Smooth |
| 5 | Knob 3 | ENV3 Sustain | Smooth |
| 5 | Knob 4 | ENV3 Release | Smooth |
| 5 | Knob 5 | ENV3 >Resona | Center indent |
| 5 | Knob 6 | ENV3 >PWM | Center indent |
| 5 | Knob 7 | ENV3 >Cutoff | Center indent |
| 5 | Knob 8 | ENV3 >Pitch | Center indent |
| 6 | Knob 1 | LFO1 Frequen | Smooth |
| 6 | Knob 2 | LFO1 >Detune | Center indent |
| 6 | Knob 3 | LFO1 >PWM | Center indent |
| 6 | Knob 4 | LFO1 >Cutoff | Center indent |
| 6 | Knob 5 | LFO2 Frequen | Smooth |
| 6 | Knob 6 | LFO2 >Detune | Center indent |
| 6 | Knob 7 | LFO2 >PWM | Center indent |
| 6 | Knob 8 | LFO2 >Cutoff | Center indent |
| 7 | Knob 1 | FLT Cutoff | Smooth |
| 7 | Knob 2 | FLT Resonanc | Smooth |
| 7 | Knob 3 | Key>Cutoff | Smooth |
| 7 | Knob 4 | Vel>Cutoff | Smooth |
| 7 | Knob 5 | AMP drive | Smooth |
| 7 | Knob 6 | AMP volume | Smooth |
| 7 | Knob 7 | AMP pan | Center indent |
| 7 | Knob 8 | AMP spread | Smooth |
| 8 | Knob 1 | TG mix | Smooth |
| 8 | Knob 2 | TG contour | Smooth |
| 8 | Knob 3 | TG width | Smooth |
| 8 | Knob 4 | DLY mix | Smooth |
| 8 | Knob 5 | DLY feedback | Smooth |
| 8 | Knob 6 | DLY mod | Smooth |
| 8 | Knob 7 | DLY locut | Smooth |
| 8 | Knob 8 | DLY hicut | Smooth |
| 6 | Button 1 | LFO1 retrigg | Latching |
| 6 | Button 5 | LFO2 Retrigg | Latching |
Details
- Made for
- reFX Vanguard 2
- Format
- VST3
- DAW
- Ableton Live
- Works with
- Roto-Control
- Panel used
- 64 knobs, 2 buttons, 8 pages
- Added
- 2026-10-29