Chase Bliss Clean
Clean on MIDI channel 3, laid out the way the pedal is: page 1 the front panel, page 2 the eight dip switches as stepped knobs, page 3 the deeper gate, swell and filter settings. The switches carry swell, release type, mode, physics and bypass on page 1, the remaining dips on page 2, and preset recall on page 4.
Tested with the device Somebody has run this into the gear it was made for.
Does this work with your Chase Bliss Clean?
Open ROTO-SETUP, select the slot you want to overwrite, then File > Import.
Set this to match your gear and we will change it in the file before you download it.
The layout
Page 1
DYNAMICS
SENSITIVITY
WET
ATTACK
EQ
DRY
EOM
RAMP SPEED
Page 2
DYNAMICS DIP
- DYN DIP OFF
- DYN DIP ON
ATTACK DIP
- ATT DIP OFF
- ATT DIP ON
EQ DIP
- EQ DIP OFF
- EQ DIP ON
DRY DIP
- DRY DIP OFF
- DRY DIP ON
WET DIP
- WET DIP OFF
- WET DIP ON
BOUNCE DIP
- BOUNCE OFF
- BOUNCE ON
SWEEP DIP
- SWEEP OFF
- SWEEP ON
POLARITY DIP
- POLARITY FWD
- POLARITY REV
Page 3
GATE RELEASE
GATE SENS
SWELL IN
USR RELEASE
BAL FILTER
SWELL OUT
All 46 controls
| Page | Control | Name | Sends | Channel | Range | Feel |
|---|---|---|---|---|---|---|
| 1 | Knob 1 | DYNAMICS | CC 14 | 3 | Center indent | |
| 1 | Knob 2 | SENSITIVITY | CC 15 | 3 | Center indent | |
| 1 | Knob 3 | WET | CC 16 | 3 | Center indent | |
| 1 | Knob 4 | ATTACK | CC 17 | 3 | Center indent | |
| 1 | Knob 5 | EQ | CC 18 | 3 | Smooth | |
| 1 | Knob 6 | DRY | CC 19 | 3 | Smooth | |
| 1 | Knob 7 | EOM | CC 100 | 3 | Smooth | |
| 1 | Knob 8 | RAMP SPEED | CC 20 | 3 | Smooth | |
| 2 | Knob 1 | DYNAMICS DIP | CC 61 | 3 | 2 detents: DYN DIP OFF, DYN DIP ON | |
| 2 | Knob 2 | ATTACK DIP | CC 62 | 3 | 2 detents: ATT DIP OFF, ATT DIP ON | |
| 2 | Knob 3 | EQ DIP | CC 63 | 3 | 2 detents: EQ DIP OFF, EQ DIP ON | |
| 2 | Knob 4 | DRY DIP | CC 64 | 3 | 2 detents: DRY DIP OFF, DRY DIP ON | |
| 2 | Knob 5 | WET DIP | CC 65 | 3 | 2 detents: WET DIP OFF, WET DIP ON | |
| 2 | Knob 6 | BOUNCE DIP | CC 66 | 3 | 2 detents: BOUNCE OFF, BOUNCE ON | |
| 2 | Knob 7 | SWEEP DIP | CC 67 | 3 | 2 detents: SWEEP OFF, SWEEP ON | |
| 2 | Knob 8 | POLARITY DIP | CC 68 | 3 | 2 detents: POLARITY FWD, POLARITY REV | |
| 3 | Knob 2 | GATE RELEASE | CC 24 | 3 | Smooth | |
| 3 | Knob 3 | GATE SENS | CC 25 | 3 | Smooth | |
| 3 | Knob 4 | SWELL IN | CC 26 | 3 | Smooth | |
| 3 | Knob 5 | USR RELEASE | CC 27 | 3 | Smooth | |
| 3 | Knob 6 | BAL FILTER | CC 28 | 3 | Smooth | |
| 3 | Knob 7 | SWELL OUT | CC 29 | 3 | Smooth | |
| 1 | Button 1 | SWELL | CC 103 | 3 | Latching | |
| 1 | Button 4 | RELEASE TYPE | CC 21 | 3 | 1 to 3 | Latching |
| 1 | Button 5 | MODE | CC 22 | 3 | 1 to 3 | Momentary |
| 1 | Button 6 | PHYSICS | CC 23 | 3 | 1 to 3 | Latching |
| 1 | Button 7 | MAX DYN | CC 106 | 3 | Latching | |
| 1 | Button 8 | BYPASS | CC 102 | 3 | Latching | |
| 2 | Button 1 | MISO DIP | CC 71 | 3 | Latching | |
| 2 | Button 2 | SPREAD DIP | CC 72 | 3 | Latching | |
| 2 | Button 3 | LATCH DIP | CC 73 | 3 | Latching | |
| 2 | Button 4 | SIDECHAIN | CC 74 | 3 | Momentary | |
| 2 | Button 5 | NOISE GATE | CC 75 | 3 | Latching | |
| 2 | Button 6 | MOTION DIP | CC 76 | 3 | Latching | |
| 2 | Button 7 | SWELL AUX | CC 77 | 3 | Latching | |
| 2 | Button 8 | DUSTY DIP | CC 78 | 3 | Latching | |
| 3 | Button 3 | ENV MODE | CC 31 | 3 | 1 to 3 | Latching |
| 3 | Button 5 | SHIFTY MODE | CC 32 | 3 | 1 to 3 | Latching |
| 3 | Button 7 | SPREAD ROUTI | CC 33 | 3 | 1 to 3 | Latching |
| 4 | Button 1 | BILL BASSS | Program change | 3 | Latching | |
| 4 | Button 2 | DUST ONE | Program change | 3 | Latching | |
| 4 | Button 3 | BUTTON 27 | Program change | 3 | Latching | |
| 4 | Button 5 | PRESET 1 | Program change | 3 | Latching | |
| 4 | Button 6 | PRESET 2 | Program change | 3 | Latching | |
| 4 | Button 7 | PRESET 3 | Program change | 3 | Latching | |
| 4 | Button 8 | PRESET 4 | Program change | 3 | Latching |
Details
- Made for
- Chase Bliss Clean
- Works with
- Roto-Control
- Panel used
- 22 knobs, 24 buttons, 4 pages
- MIDI channel
- 3
- Added
- 2026-10-05